In order to deliver a personalised, responsive service and to improve the site, we use cookies to remember and store information about how you use it. By using the website and agreeing to this policy, you consent to our use of cookies in accordance with the terms of this policy.

Accept Cookies Read more about Cookies

 

Brands » Aglas » Acrylic Binding Resins » Technical Characteristics

Acrylic Binding Resins

Aglas Akrilne vezivne smole

AKSA are acrylic binding resins that are used in combination with various fillers for producing high-quality products in construction and elsewhere.


Technical Characteristics

 

AKSA 16

AKSA N

Refractive index

1.422–1.429

1.423-1.427

Flow time, Ford 4

10–15s (20°C)

11–19s

Viscosity

30–65mPas (20°C)

50–100mPas

APHA colour

10

20

Acid value

40-70

60–80mg KOH/g

Solidification time

25–45 minutes*

25–45 minutes**

Exotherm peak

59–80°C

59–80°C

Open time

15-20 minutes***

10-15 minutes****

* The solidification time measures the time until the maximum temperature of the composite is reached, with a layer thickness of 2cm and an Aksa 16/filler ratio = 20/100. 4% of toughener is used (per resin).
* The solidification time measures the time until the maximum temperature of the composite is reached, with a layer thickness of 2cm and an Aksa N/ATH ratio = 20/100. C. 0.5% of hardener. The recipe (and solidification) depend also on the type of fillers used.
*** Open time is the time from when the toughener (4% per resin) is mixed in and until viscosity begins to increase, with a layer thickness of 2cm and an Aksa 16/filler ratio = 20/100. After the open time has been reached, the mass begins to be "drawn".
**** Open time is the time from when the catalyst is mixed in and until viscosity begins to increase, with a layer thickness of 2cm and an Aksa N/ATH ratio = 20/100. After the open time has been reached, the mass begins to be "drawn".

In order to deliver a personalised, responsive service and to improve the site, we use cookies to remember and store information about how you use it. By using the website and agreeing to this policy, you consent to our use of cookies in accordance with the terms of this policy.

Accept Cookies Read more about Cookies